Urban Services
One of the common tools used in large and small cities for transporting and transferring waste is the hopper garbage collection system.
This equipment consists of two parts: the hopper and the waste container. Initially, waste is unloaded into the hopper section, and then it is transferred to the container section using paddles inside the hopper. Once fully loaded, the waste is unloaded at disposal centers by the paddle inside the container.
1
Useful cargo compartment volume: 8 cubic meters.
2
Loading capacity: 4 tons.
3
Floor sheet thickness: 4 millimeters.
4
Wall sheet thickness: 3 millimeters, rolled and shaped.
5
The bearings inside the hopper are made of European polyamide material.
6
The bearings of the discharge plate are made of European polyamide material.
7
Equipped with two leachate tanks, each with a capacity of 200 liters, located in the hopper section and inside the compartment.
8
Installation of sealing strips between the body and the discharge plate in the discharge section.
9
Equipped with a rotating beacon light and a night work light.
10
Painting: Includes epoxy primer and polyurethane topcoat with a thickness of 70 microns.
11
Installation of user equipment on the vehicle chassis according to Standard 11889 of the Iranian National Standards Organization.
Phone number: 021-66796922-23
Fax number: 021-66800921
Factory: Tehran, Kilometer 4, Old Karaj Road
end of Fath Street 17, No. 23
